To run LiveScope through the ice, you need a LiveScope transducer, a compatible networked Garmin display, a sonar module (the GLS 10 for LVS32 and LVS34 models), a 12-volt lithium battery with a charger rated for it, a pole and mount to hold the transducer in the water, and a case to carry everything. Check Garmin’s compatibility list before you buy, because not every display works with every transducer.
The core parts
Transducer
The transducer goes into the water through your hole and does the sensing. LiveScope Plus (LVS34) is a common choice, and LiveScope XR (LVS62) offers longer range. The older LVS32 still works with many setups. The transducer must sit fully below the bottom of the ice, so the pole length matters, especially on thick ice.
Sonar module (GLS 10)
For the LVS32 and LVS34 transducers, the GLS 10 sonar black box sits between the transducer and the display. Check what your model needs before you buy, since requirements can differ for newer transducers.
Display
The display must be a compatible networked Garmin chartplotter, such as the ECHOMAP UHD2 or Ultra series or a GPSMAP unit. Screen size is a trade-off. A 7-inch screen is the practical minimum, and 9 to 10 inches is popular because it shows more detail. Larger screens are heavier and draw more battery power.
Battery and charger
LiveScope systems run on 12 volts. A 12-volt LiFePO4 lithium battery is the usual choice. Battery size depends on display size and how long you fish. Batteries of roughly 20 to 50 amp-hours are common, and a larger battery gives more runtime but adds weight.
Use a charger rated for LiFePO4 batteries. Most lithium packs will not charge below 32°F (0°C), so charge indoors or in a warm vehicle, and keep spare batteries close to your body between uses.
Pole and mount
The transducer mounts on a pole that lets you lower it through the hole and rotate it to aim. Garmin sells an ice pole, and aftermarket mounts with rotating or locking heads are also common. If you want the Perspective view, you need a mount that supports it.
Carry case
A case or shuttle holds the display, sonar module, and battery. Many anglers choose a case sized for their display so the cables and battery stay organized in the sled.
Optional extras
Some anglers add these items after the core setup:
- a second hole for the transducer, so you can aim at fish from a different angle
- a flasher for seeing depth directly below the jig
- a sun hood for the display in bright snow
- a cable guard or a transducer protector, since the transducer is expensive to replace
Extras are not required for a working LiveScope setup, but a protective cover is worth considering if you drop the pole often.
Budget and bundle notes
LiveScope kits are a major investment, and bundles often cost several thousand dollars. Garmin and retailers sell bundles that group the display, transducer, sonar module, battery, charger, case, and pole. Contents change by year, so read the listing and compare what is included against the core list above.
Before you buy, confirm that the display is on Garmin’s compatibility list, that the battery and charger match, and that the pole is long enough for your ice.
Common mistakes
- Assuming the transducer works alone. You need a sonar module for many models, plus a display and power.
- Skipping the compatibility check. Not every Garmin display works with every LiveScope transducer.
- Chasing range. More range does not mean more catches. Clear targets at 30 to 60 feet are often more useful.
- Forgetting the pole. On thick ice, a short pole means the transducer may not reach the water.
- Skipping safety tools. LiveScope does not replace ice checks, picks, or a plan for getting off the ice.
For a broader look at live sonar and how it compares to other options, see our Garmin Panoptix guide and our flasher vs fish finder comparison.
Safety at the hole
Cables and the pole create trip hazards around the hole, and the ice gets slick near the mount. Keep cables out of walkways and check your footing before you lean over the hole. Ice thickness is still the first thing to check. Sonar cannot tell you how thick the ice is.